iris

I totally forgot! Before I do what I said in the last post, I still need to cut out the vent holes in the sheets of wood I recently cut to size. I spent sometime thinking how to do that and the best thing I could come up with is to do the following. 1) Draw on the wood to highlighting what size hole needs to be cut (going to be a square hole because I think a circle hole on a rectangle box would look weird???) 2) Drill a small hole in the centre. I might just stab it with a knife if I can't get my hands on a small drilling machine. 3) Use a jigsaw (has a small thin blade which goes up and down) stick it through the small hole that was made and cut the square hole to the right size. 4) Sand down the inner edges to make it nice square and smooth. Never used a drill machine or a jigsaw so this should be fun 😅 Also, the UK has horrible weather this week non stop rain 🌧️ gn #DIY #Bitcoin #Mining #Woodwork #Design #Noobstr
0
0
Progress update ✅ I got my hands on a small drilling machine and made a hole in the middle.
Then put the Jigsaw blade through the hole and cut the vent hole out for the walls.
You can see how bent my cut is 🤣 and it's the same for all the other cuts. I tried to sand it down after so it was more straight. 😃 I cut a few circle holes out for the inner walls and these were much easier to cut to the right shape with a jigsaw machine. (surprised me) I cut out 6 vent holes in total. 4 on the outer walls and 2 for the inner walls. Next I will need to make the structural frames for the walls and fill it with soundproof/fireproof materials. #DIY #Bitcoin #Mining #Woodwork #Design #Noob #Drilling #Cutting
0
0